LHY Audio Reference Linear Power Upgrade for the Eversolo T8

$654.00 inc GST (where applicable)

The LHY Audio LPS-T8 is a dedicated linear power upgrade kit for the Eversolo T8, replacing the factory internal power supply with a precision low-noise design. Featuring a handcrafted toroidal transformer, dual-stage EMI filtering, ADI LT4320 rectification and LT3042 regulation, it delivers up to 90% lower ripple, resulting in greater detail, improved dynamics and a more natural musical presentation.

Available on backorder

SKU: DAW-800/120 Category: Tag: Brand:

Product Description

Reference Linear Power Upgrade for the Eversolo T8

Designed exclusively for the Eversolo T8

The LHY Audio LPS-T8 is a dedicated linear power supply upgrade kit engineered specifically for the Eversolo T8. Replacing the factory internal power supply with a precision linear power architecture, the LPS-T8 dramatically reduces electrical noise, lowers ripple, and delivers cleaner, more stable power throughout the T8.

Unlike generic power supply upgrades, the LPS-T8 follows the original internal power path of the Eversolo T8 without requiring chassis modifications or cutting. Every stage—from AC input filtering through to DC regulation—has been completely redesigned using premium components to maximise performance while maintaining seamless integration.

Why Upgrade the Power Supply?

Even the finest digital audio components are limited by the quality of their power supply. Switching supplies generate high-frequency noise and ripple that can compromise timing accuracy, reduce low-level detail, and increase the overall noise floor.

The LPS-T8 replaces the stock design with a carefully engineered linear power solution that provides a cleaner electrical foundation, allowing the Eversolo T8 to perform with greater precision and musicality.

Measured Ultra-Low Ripple Performance

  • 2.577μVrms ripple at idle
  • 3.556μVrms ripple under full load
  • Approximately 90% lower ripple than the factory power supply

Compared with the stock power supply measuring 21.13μVrms at idle and 32.09μVrms under load, the LPS-T8 delivers an exceptionally quiet electrical foundation.

This translates into:

  • Blacker backgrounds
  • Greater low-level detail
  • Improved dynamic contrast
  • Cleaner transients
  • More natural musical presentation

Handcrafted LHY Audio Transformer

At the heart of the LPS-T8 is LHY Audio’s latest hand-wound shielded toroidal transformer.

  • 0.27mm high-flux silicon steel core
  • 6N OFC copper primary winding
  • 7N OFC copper secondary winding
  • High-purity copper foil shielding
  • Layered vibration damping construction
  • 12-hour full-load testing on every transformer
  • Output consistency within ±0.5%

This bespoke transformer provides exceptionally stable power while minimising magnetic leakage and mechanical vibration.

Cleaner AC Power Delivery

The incoming AC supply first passes through a dedicated two-stage EMI filter board before reaching the transformer.

  • Two-stage EMI filtering
  • RIFA X2 & Y2 safety capacitors
  • Dual OFC-wound toroidal common-mode chokes
  • Reduced mains-borne interference

The original relay-based automatic voltage selection has also been replaced by a manual 115V / 230V terminal configuration, shortening the AC path while improving long-term reliability.

Advanced Linear Regulation

Following the transformer, the DC stage incorporates premium components selected specifically for low noise and exceptional current delivery.

  • ADI LT4320 ideal full-wave rectification
  • ADI LT3042 ultra-low-noise voltage regulation
  • PNP current boosting architecture
  • Nichicon KG and Nichicon FW premium capacitors
  • WIMA film capacitors
  • 2.0mm PCB with 2.5oz copper
  • Immersion gold PCB finish
  • WBT audiophile solder

Every design decision focuses on lowering impedance, reducing ripple and maintaining exceptionally stable voltage delivery.

Designed Specifically for the Eversolo T8

The LPS-T8 has been engineered exclusively for the Eversolo T8, ensuring perfect electrical compatibility without requiring permanent chassis modifications.

  • No chassis cutting required
  • Retains the factory digital platform
  • Purpose-built installation kit
  • Designed specifically for the T8 architecture

What You’ll Hear

Owners consistently report improvements in overall refinement and musical realism following installation.

  • Quieter background
  • Greater instrument separation
  • Improved low-level detail retrieval
  • Cleaner bass definition
  • Smoother vocals
  • More natural timing and flow

Individual results will vary depending on the complete system, associated equipment and listening environment.

The LHY Audio LPS-T8 provides the Eversolo T8 with the clean, stable power it deserves, unlocking higher levels of performance without altering the original digital architecture.

Product LHY Audio LPS-T8 Linear Power Upgrade Kit
Compatible Model Eversolo T8
Input Voltage 115V / 230V AC (Manual Selection)
Output Voltage 12V DC
Ripple Noise (Idle) 2.577μVrms
Ripple Noise (Full Load) 3.556μVrms
Ripple Reduction Approximately 88–90% lower than stock PSU
Transformer LHY Audio Hand-Wound Shielded Toroidal Transformer
Rectification ADI LT4320 Ideal Bridge Rectifier
Voltage Regulation ADI LT3042 Ultra-Low Noise Linear Regulators
Main Capacitors 4 × Nichicon KG 10,000μF / 50V
Output Capacitors 12 × Nichicon FW 1,000μF / 25V
Film Capacitors 3 × WIMA 0.1μF / 1000V
PCB Construction 2.0mm PCB, 2.5oz Copper, Immersion Gold Finish
Internal Wiring OCC Copper
EMI Filter Two-Stage EMI Filter with RIFA X2/Y2 Capacitors
Accessories Included 6-Pin Ribbon Cable, Screwdriver, Hex Key, Gloves
Installation No Chassis Modification Required
Weight 0.45kg (Boards Only)

Additional Information

Weight 450 g
Dimensions 200 × 95 × 80 cm

Reviews

There are no reviews yet.

Be the first to review “LHY Audio Reference Linear Power Upgrade for the Eversolo T8”